Station Cards - Samsung iDCS 500 General Description Manual

2.3.2 STATION CARDS

DLI
This card is an eight circuit digital station interface card that provides 2B+D service when
installed in any universal card slot in all cabinets.
16DLI
This card is a sixteen circuit digital station interface card that provides 1B+D service when
installed in any universal card slot in all cabinets. Keyset daughter boards will not work
when connected to this card.
SLI
This card is a four circuit analog station interface for industry standard single line tele-
phones or other analog peripheral devices (voice mail, etc.). Each circuit is equipped
with an analog DTMF receiver and provides the over-voltage protection required for con-
nection to telephone company off premises extension circuits (OPX). It can be inserted in
any universal card slot in all cabinets. Each port on this card is intended for connection to
one telephone. Connecting multiple telephones to a port may result in incorrect operation
or damage to the card. See the installation manual part 3 for details.
8SLI
This card is a eight circuit analog station interface for industry standard single line tele-
phones or other analog peripheral devices. The 8SLI does not contain any over-voltage
protection and is not qualified as OPX. It also does not contain DTMF receivers, but shares
system DSP resources. It can be inserted in any universal card slot in all cabinets. Each
port on this card is intended for connection to one telephone. Connecting multiple tele-
phones to a port may result in incorrect operation or damage to the card. See the installa-
tion manual part 3 for details.
16SLI
This card is a sixteen circuit analog station interface for industry standard single line tele-
phones or other analog peripheral devices. The 16SLI does not contain any over-voltage
protection and is not qualified as OPX. It also does not contain DTMF receivers, but shares
system DSP resources. It can be inserted in any universal card slot in all cabinets. Each
port on this card is intended for connection to one telephone. Connecting multiple tele-
phones to a port may result in incorrect operation or damage to the card. See the installa-
tion manual part 3 for details.
8MWSLI
This card is an eight circuit analog station interface for industry standard single line tele-
phones that require operation of an industry standard message waiting lamp with a volt-
age range of 85 ~ 96 VDC. The lamp can be programmed to be on continuously or flash
2.8