Door Lock Release; Exclusive Hold; Group Listening; Headset Operation - Samsung OfficeServ 7200 General Description Manual

Supports software version 4.60 or higher
Hide thumbs Also See for OfficeServ 7200:
Table of Contents

Advertisement

DO NOT DISTURB (PROGRAMMABLE)
The Do Not Disturb (DND) feature is used to stop all calls to a station. System programming can allow or deny
use of the DND feature for each station. Parties calling a station in DND will receive reorder tone. When in DND
mode, calls may be forwarded to another destination.
ton can activate DND via the feature access code. The ANS/RLS key will flash at 112 ipm (rapidly) when DND
is set. There is a programmable option to allow a C.O. line to override DND at its ring destination if that des-
tination is a single station.

DOOR LOCK RELEASE

Stations programmed to receive calls from a door phone can dial a code to activate a contact closure for con-
trol of a customer-provided electronic door lock.

EXCLUSIVE HOLD

Pressing HOLD twice will hold a call exclusively at a station so no other station can pick up that call. Intercom
calls are automatically placed on exclusive hold. Exclusive hold for trunk calls can be denied in class of serv-
ice.

GROUP LISTENING

This feature allows users to turn on the speaker while using the handset. It allows a group of people to listen
to the distant party over the speaker without the microphone turned on.

HEADSET OPERATION

Every keyset can be programmed to allow the use of a headset. In the headset mode, the hookswitch is dis-
abled and the ANS/RLS key is used to answer and release calls. Keyset users may turn headset operation
ON/OFF by keyset programming or more easily by pressing the headset ON/OFF key. The headset key lights
steady red when the keyset is in headset mode.

HEARING AID COMPATIBLE

All OfficeServ 7200 keysets are hearing aid compatible as required by Part 68 of the FCC requirements.
LINE QUEUING WITH CALLBACK
When the desired outside line is busy, the user can press the CALLBACK key or dial the access code to place
his/her station in a queue. The user will be called back when the line is available (a maximum of 100 callbacks
are allowed system-wide at one time including busy station and busy trunk).
LINE SKIPPING
When the user is talking on an outside line and the automatic hold feature is turned off, he/she may press an
idle line key and skip to that line without causing the previous call to go on hold.
LOUD RINGING INTERFACE
The MIS daughter board provides an audible ring tone output. This can be connected to a paging system or
single loud speaker to provide loud ring tone for a specific station only. The tone is preset and can not be
changed.
See Forward DND option.
4.38
A keyset without a DND but-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents