Copy Kit; Plug-In Counter; Key Counter; Vendor Mode - Konica Minolta bizhub 250 Service Manual

Field Service Ver. 1.0 Aug. 2005
12.3.4

Copy Kit

Functions
• To enter a value for the Copy Kit Counter.
Use
• When the current value reaches the set value, the following appears.
• Mode 2: The icon
Setting/
• Mode 3: The maintenance call reminder "M4" appears and copying is prohibited.
Procedure
• Press the Clear key to clear the set value.
• Use the Keypad to type in the set value.
12.3.5

Plug-In Counter

Functions
• To select the counting method.
Use
• The default setting is "No. of Prints".
Setting/
Procedure
• No. of Prints: The count increments according to the number of pages that is outputted.
• Copy Cycle: The count increments according to the number of copies.
<Count Table for the Plug-In Counter>
Copy Mode
Large Size Counter
Total Counter
With "No. of Prints"
selected
With "Copy Cycle" selected
12.3.6

Key Counter

Functions
• To select whether to enable or disable the Key Counter.
Use
• The default setting is "OFF".
Setting/
Procedure
• If the Key Counter is installed, select "Yes".
12.3.7

Vendor Mode

• When the Key Counter, Coin Vendor or Data Controller is installed, select the appropri-
Functions
ate option.
Use • To select the mounted option.
• The default setting is "OFF".
Setting/
Procedure
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
appears in the Additional Message Display.
"No. of Prints" Copy Cycle
For 1-sided copies
Non-standard
size
Mode
1 2 3
1
1
Yes "OFF"
"OFF" Coin
For 2-sided copies
Non-standard
Standard size
size
Mode Mode
1 2 3 1 2
1 2 2 1 2
1 2 2 2
Card
12. Counters
Standard size
Mode
3 1 2 3
2 1 4 4
2 4 4
199