Punch Hold Position Adjustment (Pu-501) - Konica Minolta bizhub 250 Service Manual

8. Mechanical adjustment
8.4

Punch Hold Position Adjustment (PU-501)

A
32
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
1. Set the copier into the Hole Punch
mode and make a 1-sided copy from
a 1-sided original.
2. Check width A on the output paper.
4349F3C511DA
3. Display the Tech. Rep. Mode screen.
For details of how to display the
Tech. Rep. Mode screen, see the
Adjustment/Setting of the main unit
service manual.
4. Touch [Tech. Rep. Choice].
4349F3E521DA
5. Touch [Finisher].
6. Touch [Punch Stop Position].
4349F3E522DA
7. Press the Clear key and use the 10-
Key Pad to set the value.
• To make width A wider, enter a posi-
tive value.
• To make width A narrower, enter a
negative value.
Adjustment range: +10 max. and -10
4349F3E523DA
min.
1 increment: 0.5 mm
Use the
Field Service Ver. 1.0 Aug. 2005
key to switch between + and -.