Xerox Phaser 6121MFP Service Manual page 519

Phaser 6121MFP Service Manual
Fax Send Options Setup Menu
Menu Item
Lighten/Darken
Quality Default
Send Mode
Header
Reset to Default?
Fax Receive Options Setup Menu
Menu Item
Memory Receive
Number of Rings
Scale to Fit
Description
Specifies the density level of the image or text.
Specifies the resolution of the scanned image being
faxed:
Standard/Text – For documents containing large or
easy-to-read text.
Fine/Text – For documents containing text that
needs higher resolution, such as small print or
handwritten text.
SuperFine/Text – For text that needs the highest
resolution, or detailed illustrations (not photos).
Standard/Photo – For documents containing
standard photos.
Fine/Photo – For photos needing higher resolution.
Super Fine/Photo – For photos needing the highest
resolution.
Scan then Dial (default) – The printer scans the
documents and then transmits the fax.
Dial then Scan – The printer dials and connects to
the destination before scanning the documents to
fax.
On – Sender information is included in the fax
transmission: date and time, transmitter's name
and fax number, session number, page number,
and total page number.
Off – Sender transmission information is not
printed.
When selected, resets all Send options to their
original factory defaults.
Description
On – Faxed data is stored in memory instead of
being printed when received.
Off (default) – Faxes are printed at the time they
are received.
Specifies the number of rings (from 1 to 16) allowed
before the printer connects to an incoming fax.
Used when the image being received is larger than
the printable area of the paper.
On – The information is reduced to fit the page.
Off – The information is divided into the number of
pages it takes to print it.
Crop – The information that is outside the
printable area of the page is not included in the fax
printout.
Reference
A-13