Xerox Phaser 6121MFP Service Manual page 518

Reference
Fax Default Setup Menu
A-12
The Fax Default Setup menu contains the following sub menus.
Sub Menu
Auto Redial Setup
Fax COMM Setup
Device Setup
Send Options Setup
Receive Options Setup
Fax Report Setup
Settings
Attempts – Specifies the number of redial
attempts.
Every – Specifies the time between redial attempts.
Tone/Pulse – Specifies either a tone or a pulse for
the fax line. The default is "0" which is tone.
Line Monitor – Specifies the volume (Off, Low,
High) of the external phone (line monitor). Allows
you to hear the fax dialing and connecting.
PSTN/PBX – Specifies the type of circuit used by
the fax phone line, either PSTN (default) or PBX.
Select whether the connected telephone wiring is a
public switched telephone network (PSTN) or a
private branch exchange (PBX). For a PBX system,
the prefix number (outside line access number or
extension number) can be specified.
Reset to Default? – When selected, resets the Fax
COMM settings back to their original factory
defaults.
Country – Specifies the country where the printer is
located.
Date & Time – Specifies the current date and time
where the printer is located.
Date Format – Specifies date format:
MM/DD/YYYY, DD/MM/YYYY, or YYYY/MM/DD.
Device Fax Number – The printer's fax number.
Sender's Name – The name that prints on the fax
transmission report as the person who sent the fax.
Lighten/Darken
Quality Default
Send Mode
Header
Reset to Default?
For details, see "Fax Send Options Setup Menu" on
page A-13.
Memory Receive
Number of Rings
Scale to Fit
Receive Print
Receive Mode:
Forward
Footer
Select Tray
Reset to Default?
For details, see "Fax Receive Options Setup Menu" on
page A-13.
Activity Report – Provides information about
completed fax jobs.
Send Report – Provides information about fax jobs
sent.
Receive Report – Provides information about
received faxes.
Phaser 6121MFP Service Manual