Output Tray - Xerox Phaser 6121MFP Service Manual

Multi-function printer

Hide thumbs Also See for Phaser 6121MFP:

Table of Contents

Theory of Operation

Media Size Detection

Media size is detected using the Registration Sensor. The length of the media is

determined by the length of time the Registration Sensor remains High indicating

media in the registration section.

If the media size specified by the controller does not match the media size

detected by the Registration Sensor, the system displays an error message on the

Control Panel. The sheet causing the size error continues through the print process

and is output to the tray. Operations for subsequent sheets are specified from the

Output Tray

Media is transported from the Fuser to the output tray using the Exit Roller. The

Exit Sensor monitors the media output.

s6121mfp-165

For printers without an installed Duplex Unit, the exit roller is driven by the Main

Motor. During 1-sided printing, the exit roller rotates in the forward direction and

feeds the media onto the output tray. If an optional Duplex Unit is attached, the

exit roller is driven by the Duplex Unit.

Phaser 6121MFP Service Manual