Service's Choice Function Descriptions
Phaser 6121MFP Service Manual
Send(TX) Speed
Sets the transmit start speed.
Default Setting
The default setting is V.34 33600 bps.
Available Settings
Choose the mode from among the following.
•
V.34: 33600 (default), 31200, 28800, 26400, 24000, 21600, 19200, 16800
•
V.17: 14400, 12000, 9600, 7200
•
V.29: 9600, 7200
•
V.27: 4800, 2400
Rcv(RX) Speed
Sets the reception start speed.
Default Setting
The default setting is V.34 33600 bps.
Available Settings
Choose the mode from among the following.
•
V.34: 33600 (default), 31200, 28800, 26400, 24000, 21600, 19200, 16800
•
V.17: 14400, 12000, 9600, 7200
•
V.29: 9600, 7200
•
V.27: 4800, 2400
Send(TX) Level
Sets PSK/FSK signal output level.
Default Setting
The default setting is -9 dBm.
Available Settings
-17 to -10 dBm, -9 dBm (default), or -8 to -2 dBm.
Adjustments and Calibrations
6-9