Default Setting - Epson LX-300+II RTP Service Manual

EPSON LX-300+II/300+II RTP/1170II

1.4.2.3 Default Setting

There are some parameters that can be changed by users and will be referred at the time of
initialization of the printer.

Setting mode
1. Enters the Default setting mode.
The method of selecting language for "Usage of this mode" is printed.
2. Select language for "Usage of this mode" by LF/FF button.
Font LEDs show the language for "Usage of this mode" that is currently selected.
This section will be advanced one by one as the button is pressed and the On/Off/
Blink/2-Blink of those three LEDs will also be changed according to the selection.
3. Press Tear Off button.
The current setting and the "Usage of this mode" by selected language will be printed
on the paper set in the paper path at that time.
4. Select Menu by Tear Off button.
Font LEDs show the menu which is selected at that time. The selection will be
advanced one by one as the button is pressed and the combination of those three LEDs
status of On/Off/Blink/2-Blinks will be changed according to the selection.
5. Select setting value by LF/FF button.
Font LEDs and Pause LED show that menu's value by status of On/Off/Blink/2-
Blinks. That value can be changed by pressing LF/FF button and the LEDs status of
On/Off/Blink/2-Blinks will be changed as the button is pressed.
6. When LF/FF button is pressed, the printer stores the last setting value in memory.
7. Repeat (4) to (6).
The other items can be changed in the same manner.
The menu selection will return to the first menu after the last menu selection is over.
8. Turn the printer off.
The setting is stored into non-volatile memory.
PRODUCT DESCRIPTION
Item
Page length for tractor
Skip over perforation
Auto tear off
Auto line feed
Print direction
Software
0 slash
High speed draft
I/F mode
Auto I/F wait time
Baud rate
Parity
Data length
Parallel I/F bidirectional mode OFF, ON
Packet mode
Character Standard
table version
NLSP version
International character set
for Italic table
Manual feed wait time
Buzzer
Auto CR
(IBM 2380/2381 Plus) *1
*1
IBM character table
*1 This setting is effective when IBM 2380 (LX-300+II) or IBM2381 (LX-1170II) Plus
emulation is selected.
*2 Settings with bold weight mean the standard factory settings.
Operation
Table 1-27. Setting Menu
2
Setting / Value *
3 inch, 3.5 inch, 4 inch, 5.5 inch, 6 inch, 7 inch, 8inch, 8.5 inch,
11 inch, 70/6 inch, 12 inch, 14 inch, 17 inch
OFF, ON
OFF, ON
OFF, ON
Bi-d., Uni-d., Auto
LX-300+II: ESC/P2, IBM 2380 Plus
LX-1170II: ESC/P2, IBM 2381 Plus
OFF, ON
OFF, ON
Auto, Parallel, Serial, USB
10 seconds, 30 seconds
19200BPS, 9600BPS, 4800BPS, 2400BPS, 1200BPS,
600BPS, 300BPS
None, Odd, Even, Ignore
8 bit, 7 bit
Auto, OFF
Italic, PC437, PC850, PC860, PC863, PC865, PC861, BRASCII,
Abicomp, Roman8, ISO Latin 1, PC858, ISO 8859-15
Italic, PC437, PC850, PC437, Greek, PC853, PC855, PC852,
PC857, PC866, PC869, MAZOWIA, Code MJK, ISO 8859-7,
ISO Latin 1T, Bulgaria, PC774, Estonia, ISO 8859-2, PC 866
LAT., PC 866UKR, PC APTEC, PC708, PC720, PCAR 864,
PC860, PC865, PC861, PC863, BRASCII, Abicomp, Roman8,
ISO Latin 1, PC858, ISO 8859-15, PC771, PC437 Slovenia,
PC MC, PC1250, PC1251
Italic U.S.A., Italic France, Italic Germany, Italic, U.K., Italic
Denmark 1, Italic Sweden, Italic Italy, Italic Spain 1
1 second, 1.5 seconds, 2 seconds, 3 seconds
OFF, ON
OFF, ON
Table2, Table1
Revision D
27