Initialization - Epson LX-300+II RTP Service Manual

EPSON LX-300+II/300+II RTP/1170II

1.6 Initialization


Power-on initialization
The initialization of this level is activated by power-on or cold-reset command
(remote RS command).
This initialization is;

to initialize the printer mechanism.

to execute Operator initialization.

Operator initialization
The initialization of this level is activated by -INIT signal (negative pulse).
This initialization is;

to clear all the buffers of data.

to cancel the download character definition.

to make the printer stand-by state, if no errors occur.

to execute Software initialization.

Software initialization
The initialization of this level is activated by the control code ESC@.
This initialization is;

to clear the unprinted data.

to make the printer's setting defaults.
PRODUCT DESCRIPTION Initialization
Revision D
35