Epson LX-300+II RTP Service Manual page 25

EPSON LX-300+II/300+II RTP/1170II
1.4.1.2 Indicators

Indication in normal mode
Table 1-25. Indication in normal mode
LED
Pause
Printer Status
Pause
Paper out error
Release lever error
Paper eject warning
Head hot warning Blink
Micro Adjust Blink
Tear off
Font selection
Fatal error Blink
*1 Pause (Orange)
-It is on when the printer is paused, and it is off when the printer is not paused.
-It blinks when Micro Adjust is enabled or the printer is in the head hot status.
*2 Paper Out (Red)
-It is on when the printer is in the Paper out status, and it is off when the printer is out
of this status.
*3 Font (Green)
-2 LEDs display the status of Font selection when continuous paper is out of the Tear-
off position .
-Both LEDs blink when continuous paper is in the Tear-off position.
 : Draft

 : Draft Condensed

: Roman

: Roman Condensed

: Sans serif

: Sans serif Condensed

: Tear Off

( : LED On, : LED Off,

PRODUCT DESCRIPTION
*1 *2
Paper Out Font
On --- ---
On On ---
On --- ---
On Blink ---
--- ---
--- ---
--- --- *3
--- --- *3
Blink Blink
: LED Blinks)

1.4.1.3 Buzzer

Paper out error:

Release lever operation error:

Fatal error:
*The description (.) and (-) in the above shows how the beeper sounds.
(.): Beeper sounds approx. 100 ms and interval is approx. 100 ms.
(-): Beeper sounds approx. 500 ms and interval is approx. 100 ms.
Operation
Revision D
Beeper sounds (...)*
Beeper sounds (...)*
Beeper sounds (-----)*
25