Synchronizing The Date And Time With Time Server; Setting The Default Value For Upload And Print/Print From Folder (User Default Settings) - Epson SureColor SC-T7700D Administrator's Manual

Administrator's Guide
2. Enter the time for the Sleep Timer to switch to power saving mode when inactivity occurs.
Note:
You can also set up from the printer's control panel.
Menu > General Settings > Basic Settings > Sleep Timer
3. Select the turning off time for the Power Off Timer.
Note:
You can also set up from the printer's control panel.
Menu > General Settings > Basic Settings > Power Off Timer
4. Click OK.
Related Information
"Accessing Web Config" on page 24
&
"Logging on to the Printer Using Web Config" on page 48
&

Synchronizing the Date and Time with Time Server

When synchronizing with the time server (NTP server), you can synchronize the time of the printer and the
computer on the network. The time server may be operated within the organization or published on the Internet.
When using the CA certificate, time-related trouble can be prevented by synchronizing with the time server.
1. Access Web Config and select the Device Management tab > Date and Time > Time Server.
2. Select Use for Use Time Server.
3. Enter the time server address for Time Server Address.
You can use IPv4, IPv6 or FQDN format. Enter 252 characters or less. If you do not specify this, leave it blank.
4. Enter Update Interval (min).
You can set up to 10,080 minutes by the minute.
5. Click OK.
Note:
You can confirm the connection status with the time server on Time Server Status.
Related Information
"Accessing Web Config" on page 24
&
"Logging on to the Printer Using Web Config" on page 48
&
Setting the Default Value for Upload and Print/Print from Folder
(User Default Settings)
You can set the default value for the functions.
You can set the following functions.
Function Settings
36