Epson LX-300+II RTP Service Manual page 83

EPSON LX-300+II/300+II RTP/1170II
5. Remove the combination gear, 8.5, 25.2 from the right frame.
Hook at the right frame
Combination gear, 8.5, 25.2
Gear, 27.5
Figure4-25. Paper Feed Mechanism Disassembly
When the paper feed mechanism is removed or replaced, perform
A D J U S T M E N T
R E Q U I R E D
the platen gap adjustment, Bi-D adjustment, top margin adjustment,
and bottom margin adjustment.
Disassembly and Assembly
4.2.7.12 Paper Guide Removal
1.
Combination spring, 1.18
2.
Plain washer, 5.2 x 0.3 x 10
3.
4.
5.
6.
7.
Disassembly and Assembly
Remove the printer mechanism. (See 4.2.3 "Printer Mechanism Removal".)
Remove the platen. (See 4.2.7.2 "Platen Mechanism Removal".)
Remove the carriage unit. (See 4.2.7.3 "Carriage Mechanism Removal".)
Remove the HP sensor. (See 4.2.7.7 "HP Sensor Removal".)
Remove the PG sensor. (See 4.2.7.8 "PG Sensor Removal".)
Remove the PF motor assembly and release lever. (See 4.2.7.10 "PF Motor Assembly
Removal".)
Release 1 hook securing the paper guide to the bottom of the paper guide to the lower
paper guide, pull the paper guide to the rear and remove it.
Hook at the left frame
Lower paper guide
Figure4-26. Lower Paper Guide Removal
Revision D
Paper guide
83