About Your Printer's Default Settings; Default Setting Mode - Epson LX–350 User Manual

Home > Control Panel

About Your Printer's Default Settings

Default Setting mode

Changing default settings
The default settings control many printer functions. While you can often set these functions through your software or printer
driver, you may sometimes need to change a default setting from the printer's control panel using the Default Setting mode.
Default Setting mode
The following table lists the default settings and the options you can select in the Default Setting mode. The settings are
explained in detail after the table. For instructions on changing the default settings, see
Item
Page length for tractor
Skip over perforation
Auto tear off
Auto line feed
Print direction
Software
0 slash
I/F mode
Auto I/F wait time
Baud rate
Parity
Data length
Parallel I/F bidirectional mode
Packet mode
*2
Character table
International character set for Italic table
Pitch
*3
Auto CR (IBM PPDS)
Manual feed wait time
Buzzer
Low-noise mode
*1
Setting / value
3inch, 3.5inch, 4inch, 5.5inch, 6inch, 7inch, 8inch, 8.5inch,
11inch, 70/6inch, 12inch, 14inch, 17inch
Off, On
Off, On
Off, On
Bi-D, Uni-D
ESC/P, IBM PPDS
0,
Auto, Parallel, Serial, USB
10 seconds, 30 seconds
19200, 9600, 4800, 2400, 1200, 600, 300 BPS
None, Odd, Even, Ignore
8 bit, 7 bit
Off, On
Auto, Off
Standard model:
Italic, PC 437, PC 850, PC 860, PC 865, PC 861, PC 863,
BRASCII, Abicomp, Roman 8, ISO Latin 1, PC 858, ISO 8859-15
All other models:
Italic, PC 437, PC 850, PC 437 Greek, PC 853, PC 855, PC 852,
PC 857, PC 866, PC 869, MAZOWIA, Code MJK, ISO 8859-7, ISO
Latin 1T, Bulgaria, PC 774, Estonia, ISO 8859-2, PC 866 LAT, PC
866 UKR, PC APTEC, PC 708, PC 720, PC AR864, PC 860, PC 865,
PC 861, PC 863, BRASCII, Abicomp, Roman 8, ISO Latin 1, PC
858, ISO 8859-15, PC 771, PC437 Slovenia, PC MC, PC1250,
PC1251, KZ1048
Italic U.S.A., Italic France, Italic Germany, Italic U.K.,
Italic Denmark1, Italic Sweden, Italic Italy, Italic Spain1
10CPI, 12CPI, 15CPI, 17CPI, 20CPI, Proportional
Off, On
0.5 second, 1 second, 1.5 seconds, 2 seconds
Off, On
Off, On
Changing default settings.