Default Settings
This printer has user-selectable default settings that it refers to at initialization. The default settings
(and factory settings) are listed in Table 1-8.
Setting Method
The method of setting defaults is shown in the flowchart below.
Hold down the Economy /Condensed
button, and turn on the printer.
The printer prints:
1. Firmware version,
Protect counter value A/C.
2. How to set defaults.
3. Current settings.
Change the settings?
Turn printer power off to save settings to the EEPROM.on the main board
Figure 1-6. Default Setting Flowchart
Any default value specified is not stored in the EEPROM until the printer is turned off.
The last default value specified before power off is stored in the EEPROM.
EPSON Stylus 1500 Service Manual
START
YE S
N O
E N D
ATTENTION
Change setting menu: Alt button
Change setting value: Pause button
Printer Features
1-19