About Your Printer's Default Settings; Default Setting Mode - Epson FX-890II User Manual

About Your Printer's Default Settings

The default settings control many printer functions. While you can often set these functions through
your software or printer driver, you may sometimes need to change a default setting from the printer's
control panel using the Default Setting mode.

Default Setting mode

The following table is the default settings and the options you can select in the Default Setting mode.
The settings are explained in detail after the table. For instructions on changing the default settings, see
"Changing default settings" on page 97.
Item
Page length for front tractor*
Page length for rear tractor*
Skip over perforation
2
Auto tear off*
Auto tear-off wait time*
Auto line feed
Print direction
Software
0 slash
I/F (interface) mode
Auto I/F (interface) wait time
Parallel I/F bidirectional mode
Packet mode
Setting / value *
2
Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11, 70/6, 12, 14, 17
2
Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11, 70/6, 12, 14, 17
Off, On
Off, On
2 0.5 seconds, 3 seconds
Off, On
Bi-D, Uni-D
ESC/P, IBM PPDS
0,
Auto, Parallel, Serial*
10 seconds, 30 seconds
Off, On
Auto, Off
FX-890II/FX-890IIN/FX-2190II/FX-2190IIN
1
(the zero character with a slash)
3
, USB, Network*
User's Guide
3
Control Panel 92