CYBEX XP4040 Installer/User Manual page 70

To configure the port, you will need to first select a pair of Category 5
cables that are connected to a receiver card in the system. Connect
these cables to the first available port with the Video cable connecting
to the upper jack and the Keyboard/Mouse cable connecting to the
lower jack. Locate the DIP switches that correspond to that port and
configure them as needed. (See diagram and settings below and on the
next page.)
Repeat this process for every port of every Transmitter Module in
your system.
XP4400
Transmitter
Video
Keyboard/
Mouse
PORT 1
Dip Switch Area
Dip Switch Area
PORT 3
Dip Switch Area
Dip Switch Area
PORT 5
Dip Switch Area
Dip Switch Area
PORT 7
Dip Switch Area
Dip Switch Area
PORT 9
Dip Switch Area
Dip Switch Area
PORT 11
Dip Switch Area
Dip Switch Area
PORT 13
Dip Switch Area
Dip Switch Area
PORT 15
Dip Switch Area
Dip Switch Area
64
PORT 2
PORT 4
PORT 6
PORT 8
PORT 10
PORT 12
PORT 14
PORT 16