Administrator
Controls
Configuring User Access Privileges
1. Press the Control key twice within one second.
2. Press Alt-tab to reach the User List Menu.
3. Highlight the user you want to configure access for and press F3.
4. Highlight the first listed computer channel.
5. Use the Space Bar to toggle through the available choices:
No access
Video access only (V)
Video, keyboard and mouse only (V K)
Video, keyboard/mouse, power control (V K P)
Note: Changes to user access take effect instantly, regardless of whether
you press enter or escape.
6. Repeat steps 4-5 for each attached computer.
7. Press Enter to return to the User List Menu.
The Administrator Controls Menu is accessed by pressing the Control key
twice, then pressing Alt-tab twice. At the user profile level, this menu will
have four options: Scanning, Menu Activation, Switch Alt. User Module and
Control Alt. User Module. When logged on as the Administrator, four more
options are available. These options are explained below. For more details on
user level options, see the section, "User Controls Menu (User Level Access)".
Broadcast
Use the space bar to toggle your Broadcast Mode off or on. For more
information on Broadcast Mode, see Chapter 7, 'Basic Operations.'
Confirm Deletes
The confirm deletes option is used to specify whether users must confirm the
deletion of a channel or user before the command is processed. Use the space
bar to toggle this option off or on.
Program Manager
?
Cybex Control Panel
Administrator Controls
Scanning
Off
Broadcast
Off
Confirm Deletes
On
Menu Activation
On
Switch Alt. User Module
Control Alt. User Module
System Configuration
Configuration Control
F1-help
Enter-switch
F11-more
THE ADMINISTRATOR CONTROLS MENU
9 9