CYBEX XP4040 Installer/User Manual page 149

Key Sequence
<CM>@0<Enter>
<CM>@1<Enter>
<CM>@2<Enter>
<CM>@3<Enter>
<CM>@4<Enter>
<CM>REBOOT Addr[n] <Enter>
<CM>XPRB Addr1[n] = Addr2 <Enter>
<CM>REBOOT<Enter>
<CM>K n <Enter>
Action
Changes the hot-key sequence to the default:
1.Press and hold down the 'Num Lock' key.
2.Press and release the minus (-) key on the numeric
keypad.
3.Release the 'Num Lock' key.
Changes the hot-key sequence to the 1st alternate:
1.Press and hold down the 'Num Lock' key.
2.Press and release the asterisk (*) key on the
numeric keypad.
3.Release the 'Num Lock' key.
Changes the hot-key sequence to the 2nd alternate:
1.Press and hold down the 'Num Lock' key.
2.Press and release the plus (+) key on the numeric
keypad.
3.Release the 'Num Lock' key.
Changes the hot-key sequence to the 3rd alternate:
1.Press and hold down the 'Num Lock' key.
2.Press and release the numeric keypad forward
slash (/) key.
3.Release the 'Num Lock' key.
Changes the hot-key sequence to the 4th alternate:
1.Press and hold down the 'Control' key.
2.Press and release the tilde (~) key.
3.Release the 'Control' key.
Reboots the device connected to the XPRB at Addr .
The value, n (1-6), indicates Power Port on XPRB.
Associates the XPRB at Addr1, Power Port n with
the computer interface module at Addr2.
Reboots the selected computer, if connected to an
XPAB or associated with a power port on an XPRB.
Sets the keyboard scanset for AT and PS/2 systems
where n is a scanset number 1-3.
143