CYBEX XP4040 Installer/User Manual page 53

Displaying Local/Remote Flash ROM Status
When you choose Option 2 from the main menu, you will be prompted to enter
a channel address. Enter a remote address or leave the field blank for the local
channel. The module's firmware and current revision level will be displayed.
Downloading Serial Port to Flash ROM
Option 3 allows you to transfer firmware upgrades from your computer,
through the serial port, to your local XPIQ module's Flash storage.
Rebooting a Computer
If you have a ReBoot xP in your system, Option 5 allows you to reset attached
computers through the menuing system.
Enter the address of the channel you wish to reset. If the channel is an XPRB
module, you will also need to give the position number of the Power Port on
the XPRB. See below. If the channel is an XPAB module, accept the default
value of "1".
Searching for Connected Chassis
Choose Option 5 to search your XP4000 system for all connected chassis.
You will be prompted for the range of chassis numbers you want to search.
Enter the first and last chassis numbers for your search or press enter to accept
the default values of 1 and 25. After you have entered values, the connected
chassis in the selected range will be listed on the screen.
Download Serial Port to Flash ROM
Start XMODEM download now
Reboot computer
Channel address: 3C
Power Port number: 1
1
2
3
4
5
6
Search for connected chassis
First chassis number [1]:
Last chassis number [25]:
47