User Controls Menu (User Level Access) - CYBEX XP4040 Installer/User Manual

User Controls
Menu (User
Level Access)
The User Controls Menu is accessed by pressing the Control key twice, then
pressing Alt-tab. (System administrators will have to press Alt-tab twice to
pass by the User List Menu.) At the user profile level, this menu will have four
options: Scanning, Menu Activation, Switch Alt. User Module and Control
Alt. User Module. More options are available if you are logged on as the
system administrator. See the section, "Administrator Functions" for details.
Scanning
You can activate scanning through the User Control Menu as well as through
keyboard commands.
1. Highlight the Scanning option in the User Control Menu.
2. Use the space bar to toggle through your available options: Off, By address
or By name.
3. Press Enter to accept your selection.
Menu Activation
If you do not wish to have any of the programmed sequences (Ctrl-Ctrl, Alt-
Alt or Shift-Shift) activate your OSD menu, disable the menu activation.
1. Highlight the Menu Activation option in the User Control Menu.
2. Use the space bar to toggle between Off and On.
3. Press Enter to accept your selection.
Note: Once Menu Activation is turned off, the only way to bring up the OSD
menu is by keyboard hotkey sequence. Once the Command Line Entry
Menu is displayed, you may Alt-tab through your menus normally.
Program Manager
?
Cybex Control Panel
User Controls
Off
Scanning
Menu Activation On
Switch Alt. User Module
Control Alt. User Module
Search:
F1-help
Enter-switch F11-more
THE USER CONTROLS MENU
9 4