Table of Contents
Advertisement
1
XP4000 Series
Overview
XP4010/XP4040/
XP4080 Units
General overview of
Front and Rear Access
models
Product Overviews
The XP4000 Series products allow multiple users to operate PC-compatible,
Macintosh, Sun, RS/6000, Silicon Graphics and Hewlett-Packard computers at
the same time. A basic XP4000 system consists of users and computers that are
all connected to one or more XP units. Any user in the system can access any
attached computer by simply 'switching' to that channel through the XP unit.
There are four chassis types available in the XP4000 Series: The XP4010, the
XP4040, the XP4080 and the XP4400. All models can be used in any
combination within one XP4000 system.
An XP system consists of four main components:
One or more XP4040/XP4010/XP4080/XP4400 units
A combination of operation modules
Associated cables to connect users and computers to the system.
Optional XP4000 Series complement products
The quantity and type of components you receive depends on the specific
configuration you order.
The XP4040 Unit
Front Access Desktop Model:XP4040D
The front panel of a front access XP4040 unit has 9 connectors as follows:
PS/2 Keyboard
PS/2 Mouse
Serial Mouse
These connectors are used to attach a keyboard, monitor, mouse, microphone,
speakers and serial device to the front panel of the XP4040. Peripherals
attached to the front of the box make up your local console.
Each front access XP4040 unit supports up to 14 modules. The first slot on the
far left side of the XP4040D (viewed from the rear) contains the local console
Macintosh
Sun
VGA Video
1
Serial Port
Microphone
Speakers
Hide quick links:
Advertisement
Table of Contents
