Multi-Part Flash Upgrades - CYBEX XP4040 Installer/User Manual

Multi-Part
FLASH
Upgrades
Rebooting a Computer
If you have a ReBoot xP in your system, Option 5 allows you to reboot
attached computers through the menuing system.
Enter the addess of the channel you wish to reset. If the channel is an XPRB
module, you will also need to give the position number of the Power Port on
the XPRB. See below. If the channel is an XPAB module, accept the default
value of "1".
Auto-Upgrade
Option 6 allows you to auto-upgrade the Flash module.
When you select Option 6 you will be prompted for the chassis number that you
would like to upgrade. Once a chassis number is entered, the unit will connect
and upgrade the applicable modules remotely. An LED on the front panel will
blink for the duration on the upgrade.
Searching for a Connected Chassis
Option 7 allows you to search for a connected chassis.
Select a range of chassis numbers to search. It is possible to search up to 255
connected chassis.
For FLASH upgrades which come in multi-part packages, as in the case of the
XPDU, the XPRB automatically upgrades all sections together in a string rather
than section by section. The XPRB also detects if any of the needed sections are
missing and, if necessary, declines to upgrade due to missing sections.
Reboot computer
Channel address: 3C
Power Port number: 1
1
2
3
4
5
6
111