CYBEX XP4040 Installer/User Manual page 116

Downloading Local to Remote Flash ROM
Option 3 allows you to upgrade the firmware of any attached Flash upgradable
module from the revision stored in the local XPRB Flash, or storage, locations.
Pos Flash Type
--- -----------
1 XPRB
2 XPLU
3 XPXR
4 XPXT
5 Available
6 Available
7 Available
Download local to remote Flash ROM
Local Flash ROM (1..7): 2
Remote channel address: C
Remote Flash ROM (1..7): 1
You are first prompted to enter the number of the local Flash ROM source.
Enter the storage location number of the firmware you wish to upgrade.
Reference the table that prints out just above the prompt for available location
numbers. You must be transferring from the local XPRB module, which is the
one you are currently connected to.
Next, enter the address of the channel you wish to upgrade. This address can
be in your local unit or any remote unit.
If you are upgrading another XPRB module, enter the Flash ROM storage
destination when prompted. If you are upgrading any other type of module,
accept the default value of "1".
Downloading Serial Port to Flash ROM
Option 4 allows you to transfer firmware upgrades from your computer,
through the serial port, to your local XPRB module's Flash storage positions
or to any Flash upgradable module in the system. The local XPRB is always
the one you are currently connected to.
Download Serial Port to Flash ROM
Channel address: C
Flash ROM number (1..7): 2
Start XMODEM transfer now
You will be prompted for a channel address. Enter a remote channel address
or press enter at the prompt for the local channel. Enter the storage location
number that you wish to transfer the information to. If you are uncertain which
locations are available, run Option 2 to obtain this information.
Flash
FW Rev
-----
CMON
C-02
C-04
C-04
110