CYBEX XP4040 Installer/User Manual page 107

Configuration Control
Use this option to transfer your user and channel configuration settings to
another XPDU module in the system.
To send your settings to another XPDU module:
1. Press the Control key twice within one second.
2. Press Alt-tab twice to reach the Administrator Controls Menu.
3. Highlight the Configuration Control option and press Enter.
4. Use the Space Bar to toggle through the available configuration port
choices. Select "Internal".
5. Enter the port address of the remote XPDU module you are transferring
to. Be sure to include the chassis number and port letter ( i.e. 3H).
6. In the Direction of Transfer field, use the Space Bar to select "Send".
7. Enter the admin password for the remote XPDU module.
8. Highlight the Begin Configuration field and press Enter.
The receiving XPDU module will display a message indicating that a trans-
fer is in progress.
To receive your settings from another XPDU module:
1. Press the Control key twice within one second.
2. Press Alt-tab twice to reach the Administrator Controls Menu.
3. Highlight the Configuration Control option and press Enter.
4. Use the Space Bar to toggle through the available configuration port
choices. Select "Internal".
5. Enter the port address of the remote XPDU module you are transferring
from. Be sure to include the chassis number and port letter ( i.e. 3H).
6. In the Direction of Transfer field, use the Space Bar to select "Recv".
7. Enter the admin password for the remote XPDU module.
8. Highlight the Begin Configuration field and press Enter.
The sending XPDU module will display a message indicating that a transfer
is in progress. When the transfer is complete, the receiving XPDU will
restart. Note that the screen will go blank for several seconds.
101