Table of Contents
Advertisement
Application functions
To copy using the "OHP Interleave" function
0 The Finishing setting cannot be changed.
0 The number of copies is set to "1" and cannot be changed.
1
Position the document to be copied.
–
For details on positioning the document, refer to "Feeding the doc-
ument" on page 3-7.
2
Load overhead projector transparencies into the bypass tray or the 1st
tray. Load the interleaf paper into the desired paper tray.
–
Use interleaf paper with the same size as the overhead projector
transparencies, and load them in the v orientation.
3
Touch [OHP], and then touch [OK].
–
If the overhead projector transparencies are loaded into the 1st
tray, touch [Paper], select the 1st tray, and then touch [Change Tray
Settings].
The Paper screen appears.
4
Touch [Application], and then touch [Sheet/Cover/Chapter Insert].
–
To cancel all settings for the Application functions, touch [Reset].
The Sheet/Cover/Chapter Insert screen appears.
C252
8
8-3
Advertisement
Table of Contents
Troubleshooting
