Removing The Bezel - IBM eServer xSeries 235 Type 8671 Option Installation Manual

Removing the bezel

The following illustration shows how to remove the bezel from a rack configuration
server.
Complete the following steps to remove the bezel:
1. Review the information in "Safety" on page v, "Installation Guidelines" on page 9,
2. Remove the server cover and locate the bezel-release lever.
3. Press the bezel-release lever to the unlocked position as indicated on the lever.
4. Pull the right side of the bezel away from the chassis; then, slide the bezel to
5. Remove the bezel from the server and store the bezel in a safe place.
18
IBM xSeries 235 Type 8671: Option Installation Guide
and "Handling static-sensitive devices" on page 10.
the right to disengage the tabs.
Bezel-release lever
Bezel