Removing the bezel
The following illustration shows how to remove the bezel from the tower model
server.
Note: If you have not already removed the door, remove it as described in
Complete the following steps to remove the bezel:
1. Review the information in "Safety" on page v, "Installation Guidelines" on page 9,
2. Press up on the bezel-release lever.
3. Pull the top of the bezel away from the chassis; then, lift the bezel to disengage
4. Remove the bezel from the server and store the bezel in a safe place.
16
IBM xSeries 235 Type 8671: Option Installation Guide
"Removing the server door (tower model)" on page 14.
Bezel-release lever
and "Handling static-sensitive devices" on page 10.
the bottom tabs.