IBM eServer xSeries 235 Type 8671 Option Installation Manual page 42

12. Route the free end of the SCSI cable from the SCSI backplane through the
13. Attach the free end of the SCSI cable to the selected internal SCSI channel
30
IBM xSeries 235 Type 8671: Option Installation Guide
adapter-support bracket opening and toward the ServeRAID controller (see the
illustration in step 13).
connector on the ServeRAID controller. Make sure that the other end of the
SCSI cable is attached to the connector on the SCSI backplane.
Attention: When you route the SCSI cable, do not block the ventilated space
around any of the fans.
The following illustration shows how to route one SCSI cable to the ServeRAID
controller.
ServeRAID
adapter
SCSI connector A
SCSI cable