Installing The Server Door (Tower Model) - IBM eServer xSeries 235 Type 8671 Option Installation Manual

Installing the server door (tower model)

The following illustration shows how to install the door on the server.
Complete the following steps to install the server door:
1. Review the information in "Safety" on page v, "Installation Guidelines" on page 9,
2. Set the door on the bottom hinge.
3. Locate the flange on the top edge of the door.
4. Press the flange downward while pressing the top of the door toward the server
5. Close the server door.
64
IBM xSeries 235 Type 8671: Option Installation Guide
Flange
and "Handling static-sensitive devices" on page 10.
until the flange connects with the top hinge. Release the flange.
Attention: Be sure to maintain a clearance of at least 100 mm (4 inches) on
the front and rear of the server to allow for air circulation.
Door