IBM eServer xSeries 235 Type 8671 Option Installation Manual page 55

The following illustration shows the DIMM connector locations and how to install
DIMMs on the system board.
DIMM 6 (J15)
DIMM 5 (J14)
DIMM 4 (J12)
DIMM 3 (J11)
DIMM 2 (J9)
Before you begin, read the documentation that comes with your option.
Complete the following steps to install a DIMM:
1. Review the information in "Safety" on page v, "Installation Guidelines" on page 9,
and "Handling static-sensitive devices" on page 10.
2. Turn off the server and disconnect all power cords and external cables ("Turning
off the server" on page 12); then, remove the server cover (see "Removing the
server left-side cover and bezel (tower model)" on page 15 or "Removing the
server top cover and bezel (rack configuration)" on page 17).
DIMM 1 (J7)
Chapter 2. Installing options
43