IBM eServer xSeries 235 Type 8671 Option Installation Manual page 32

7. Remove the adapter-support bracket.
8. Continue with the option installation or removal procedure.
20
IBM xSeries 235 Type 8671: Option Installation Guide
Center-
fan
bracket
a. Press the release tab on each adapter-support bracket latch. There are two
latches, one at each end of the adapter-support bracket.
b. Slide the adapter-support bracket out of the guides; then, remove it from the
server.
Note: To reinstall the adapter-support bracket and other components that you
removed or disconnected, reverse the preceding steps. Remember to
reroute the cables that you disconnected and to reconnect the
center-fans cable to the system board. See "System-board internal cable
connectors" on page 4 for the location of the center-fans connector.
Adapter-
support
bracket
SCSI cable
Adapter-support
bracket latches