Start Of Fma Service May Not Complete (Cr 6886045) - Fujitsu SPARC Enterprise T2000 Product Notes

1. Log in to Solaris OS via TELNET or SSH, and then execute shutdown -i5
command to stop the system.
# shutdown -i5 -g0 -y
2. Execute showplatform command from ALOM to confirm that system is stopped.
sc> showplatform
SUNW,SPARC-Enterprise-T2000
Chassis Serial Number: 0546NNN0PL
Domain Status
------ ------
S0
sc>
3. Execute resetsc command from ALOM to reset ALOM.
sc>
Are you sure you want to reset the SC [y/n]?

Start of FMA Service May Not Complete (CR 6886045)

This issue has been fixed in System Firmware 6.7.8 or later.
Start of the Fault Management Architecture (FMA) service may not complete. And
due to the derived event, the Solaris OS shutdown may not terminate.
Event 1
■
Start of the FMA service may not complete. When you executed the svcs(1M)
command and the FMA service is offline, and if there exist two fmd processes as the
ps(1M) command execution result, this event has been occurred.
16 SPARC Enterprise T2000 Server Product Notes • September 2011
OS Standby
resetsc
y