Minolta Di450 Service Manual page 83

(12) Removal of the Web Roller
(13) Removal of the Web Pressure Roller
1. Remove the Web Roller Assy.
2. Remove two screws and the Web Roller bushing
and Web Take-Up Roller bushing.
NOTE
When reinstalling the Web Roller bushing and Web
Take-Up Roller bushing, ensure that they are in correct
position without being tilted or out of position.
4002D189AA
3. Remove the Web Roller and Web Take-Up Roller.
NOTES
• When reinstalling the Web Roller and Web Take-Up
Roller, wind the web around the Web Take-Up Roller
at least one complete turn. Make also sure that the
web is not slack off.
• When the Web Roller has been removed, clear
4002D190AB Web-Count of Consumables Counter available from
Tech. Rep. mode.
1. Remove the Web Roller Assy.
2. Remove the Web Roller and Web Take-Up Roller.
3. Remove the springs at the front and rear.
4002D191AB
4. Remove the E-rings and bushings from the front
and rear end and remove the Web Pressure Roller.
4002D192AC
D-64