Minolta Di450 Service Manual page 49

5. Snap off the C-clip and remove the Separator Roll
Assy.
1136D109AA
6. Remove five screws and the Solenoid Mounting
Bracket Assy.
NOTE
Whenever a solenoid has been replaced or a solenoid
mounting screw removed, be sure to adjust the posi-
tion of the solenoid.
D-72
4002D090AB
7. Snap off the E-ring and remove the gear.
8. Unhook the spring and remove the gear assy.
4002D091AB
9. Snap off the E-ring and remove the Paper Take-Up
Roll Assy.
4002D092AB
10. Snap off the E-ring and remove the Paper Feed
Roll.
4002D093AB
D-30