Minolta Di450 Service Manual page 56

2. Wind the fixed bead end of the cable around the
pulley five turns clockwise, from the rear toward the
front side.
4002D003AA
3. Wind the hook end of the cable around the pulley
five turns counterclockwise, from the front toward
the rear side.
NOTE
Make sure that no part of the cable rides on the other.
4002D004AA
4. Slip the Cable Holding Jig onto the pulley to secure
the cable in position.
4002D501AA
Rear
Bead
5. Position the round bead of the Scanner Drive
Cable in the pulley as shown.
NOTE
Make sure that the bead snugly rests in the slit in the
pulley.
4002D005AA
6. Wind the fixed bead end of the cable around the
pulley five turns clockwise, from the front toward
the rear side.
4002D006AA
D-37