2-8.
FUSING UNIT
(1)
Disassembly of the Fusing Unit
1. Slide out the Fusing Unit.
2. Remove two screws and the Fusing Unit Front
Cover.
4002D153AB
NOTE
When reinstalling the Front Cover, hook the tab into
position.
4002D266AA
3. Remove four harness holders.
4. Unplug the connector of the Heater Lamp on the
front.
5. Remove the Heater Lamp cord from the one edge
cover.
4002D154AC
6. Remove five harness holders.
7. Remove one screw and the Heater Lamp cord.
4002D155AB
8. Remove one screw each and the upper and lower
lamp holders at the front.
4002D156AB
D-56