Table of Contents
Advertisement
Installation and Setup Guide
Security Codes
The system supports up to 16 security codes, which can each be assigned one of 5 authority
levels. The authority level determines the functions each code can perform as follows:
Authority Levels
(authority levels can be assigned to users 3-49 only; users 1 and 2 cannot be
changed)
Level
User No.
Installer
01
System
02
Master
Partition
P1 = 03
Master
(default)
0-User
03-17
1-Arm Only
see "user"
2-Guest
see "user"
3-Duress
see "user"
4-Partition
see "user"
Master
Refer to the user guide for detailed procedures on adding/deleting security codes and
changing user attributes.
The following is a brief description of how to add user codes.
Adding a User Code:
Deleting a User Code: Master code + [8] + 2-digit user no. + [#] [0]
6-6
Functions
perform all security functions except can disarm only if used
to arm;
can enter program mode; can change System Master code;
cannot assign any other user codes (default = 4112)
only one system master code per system; can perform all
security
functions, add/delete users in all partitions, change system
master code, view event log, set system clock, program
keypad macro, program scheduled events, activate output
devices (triggers/relays) (default = 1234)
Same as Master, except add/delete users limited to
assigned partition only, (these users can be assigned
different authority
levels, if desired; any user can be assigned the partition
master authority level)
perform security functions (arm, disarm, etc.) only; cannot
add/delete
users, view event log, set system clock or program scheduled
events
arm system only
can disarm the system only if it was used to arm the system
performs security functions, but also silently sends a duress
message to the central station; reports as duress code user
number.
See Partition Master paragraph above; used to assign
other user numbers as partition masters
Master code + [8] + 2-digit user no. + user's code
Advertisement
Table of Contents
