Specifying Administrator Settings; System Setting - Konica Minolta bizhub C525 User Manual

Utility
12.4

Specifying administrator settings

This section describes the main parameters and operations that can be per-
formed after pressing the [Utility/Counter] key, then touching [3 Administra-
tor Setting].

System setting

Power Save Setting
Parameter
Low Power Mode Set-
ting
Sleep Mode Setting
Power Save Key
Entering Power Save
Mode (Fax)
Output Setting
Parameter
Print/Fax Output Set-
tings
Output Tray Setting
Bin Setting
C252
Description
Specify the desired length of time (be-
tween 10 and 240 minutes) until the ma-
chine enters Low Power mode.
Specify the desired length of time (be-
tween 15 and 240 minutes) until the ma-
chine enters Sleep mode.
Select which low power mode is entered
when the [Power Save] key is pressed.
• Low Power:
The touch panel goes off and the ma-
chine enters a mode where it con-
serves energy.
• Sleep:
Although the machine conserves
more energy in Sleep mode than in
Low Power mode, the machine must
warm up when Sleep mode is can-
celed, therefore taking more prepara-
tion time than Low Power mode.
Specify settings for faxing. For details,
refer to the Facsimile Operations and the
Network Facsimile Operations of the Us-
er's Guide.
Description
Specify settings for faxing and printing. For details, refer to the Fac-
simile Operations and Print Operations of the User's Guide.
Select the copy exit tray for each type of
job (copies, printouts, faxes and re-
ports).
The output tray 1 can be specified as
mailbin 5 and the optional output tray
can be specified as mailbin 6.
12
Default Setting
15 minutes
30 minutes
Low Power
Normal
Default Setting
Finisher FS-514
Copy: Tray 1
Print: Tray 1
Report Output: Tray 3
Fax: Tray 3
Finisher FS-501
Copy: Tray 2
Print: Tray 2
Report Output: Tray 1
Fax: Tray 1
Disable
12-27