To Check The Job Details - Konica Minolta bizhub C525 User Manual

11

To check the job details

1
In the Basic screen, touch [Job List].
The Job List screen appears.
2
Display the list containing the job whose details are to be checked.
3
Select the job whose details are to be checked, and then touch [Detail].
– If an incorrect job was selected, select a different job or touch the
button for the selected job again to deselect it.
The Check Detail screen appears.
4
After the desired information has been checked, touch [Close] or [Exit]
or press the [Reset] key.
– To return to the screen displayed before [Detail] was touched,
touch [Close].
– To return to the Basic screen, touch [Exit] or press the [Reset] key.
!
Detail
To delete a queued job or job being performed, touch [Delete] in the
Check Detail screen.
If [Detail] appears in the Check Detail screen for a job selected from the
Scan or Fax TX tab, detailed information is available on the multiple re-
cipients that the data was sent to with broadcast transmission. To view
the information, touch [Detail].
11-10
Managing jobs (Job List)
C252