Replacing toner cartridges and staples and emptying waste containers
4
Lower guide FN3, and
then pull out any paper.
–
If the punch kit is in-
stalled, pull out the
hole-punch waste
container FN3.1.
5
Return guide FN3 to its original position.
–
If the punch kit is installed, insert hole-punch waste container
FN3.1 in its original position.
6
Turn dial FN4 to feed the
paper, open the trans-
port unit cover, and then
pull out any paper.
C252
FN3.1
FN4
9
FN3
9-27