Konica Minolta bizhub C525 User Manual page 191

3
– If the binding position for the copy is set to "Auto", the binding po-
sition is automatically determined according to the orientation of
the loaded document. If the document length is 11-3/4 inch or less,
a binding position along the long side of the paper is selected. If the
document length is more than 11-3/4 inch, a binding position along
the short side of the paper is selected.
– If the binding position for the copy is set to "Auto", the binding po-
sition is set at the top or at the left.
3
Touch [Binding Direction].
– For a single-sided document, select the binding position for the
copy, and then touch [OK].
– For a double-sided document, select the binding positions for the
document and the copy, and then touch [OK].
4
Touch [Original Direction], select the orientation of the loaded docu-
ment, and then touch [OK].
– For details on specifying the document orientation, refer to "Select-
ing the document orientation (Original Direction settings)" on
page 3-24.
5
Touch [OK].
The Basic screen appears again.
3-54
Basic copy operations
C252