Table of Contents
Advertisement
M - 1 RAILS & DECK HARDWARE
A. Rails
The rail system and hardware fittings have been
selected and installed to perform specific func t ions.
Fenders or mooring lines should not be secured to the
rails or stanchions. Be certain that a clear lead exists
when running dock lines or an anchor line. A line inad-
vertently threaded around a stanchion or over the rail
could cause damage.
Assist handles or rails have been installed to provide
security for passengers in the cockpit. See Figures M1
& M2. Limiting passen ger move ment while underway
is recom mend ed. All those on board should be safely
seated whenever possi ble. Additional care must be
taken when in rough seas or foul weather.
Figure M1: Hand Rail -Bow
(Representative View - Models May Vary)
Figure M2: Passenger Assist Handle
(Representative View - Models May Vary)
Exterior Equipment - Section M
Exterior Equipment
B. Cleats
The cleats that have been installed are specifical l y
designed and are intended to be used as mooring
cleats. Their purpose is for securing the vessel to a
dock, pier, mooring, or anchor.
A pull-up style cleat is standard on SL models. The
pull-up cleat gives your boat a more sleek style. When
you desire to use the cleat, simply pull up on the cleat.
When finished with the cleat, push in and the cleat
will remain in its retracted position until the next time
you desire to use it. See Figures M3 and M4. Please
consult your Four Winns Dealer for details.
Figure M3: Pull-Up Cleat - Extended
Figure M4: Pull-Up Cleat - Retracted
Four Winns
Boats are not equipped with any
®
hardware designed
for other craft.
cleats that are in stalled on the boat are not to
be used for towing another vessel or having the
boat towed. Refer to Sec tion A - Operation for
addition al precau tions re garding ground ing and
towing.
Ski Tow
The mooring
Owner's Manual Page 98
Advertisement
Table of Contents
