Table of Contents
Advertisement
C. System Testing
All gasoline fuel systems have been factory in spected
and pressure tested in accordance with regulations in
effect at the time of manufacture. Additionally, each
fuel tank must pass rigid tests and inspections per-
formed by the fuel tank manu facturer.
Prior to taking delivery, it is important that a full inspection
be made of the entire fuel system by the selling dealer.
An entry on the Four Winns® Pre- Delivery Inspection
Form portion of the online Warranty Registration will
attest to the deal er's perfor mance of this service.
D. Fuel Fills - Domestic Models
Fuel deck fills are located either on the aft deck or
side decks, and are clearly marked with a fuel symbol
or are labeled "GAS". See Figures I1, I5, & I6. The fuel
deck fill is hinged to prevent loss. It is designed for
nozzle retention, are automatically shut-off compat-
ible and includes dual over pressure relief valves. The
water-resistant gas cap prevents water from entering
the fuel system.
Fuel Systems - Section I
Figure I4: Fuel System Components - Export Models
(Representative View - Models May Vary)
Fuel Deck Fill
w/Fuel Symbol
Figure I5: Fuel Deck Fill & Fuel Vent - Domestic Models
The "click-to-close" gas cap allows for ease of use.
To open, push the catch/release mechanism shown
in Figure I6 inward. To close, simply shut the cap and
press the cap until it "clicks" shut. Hearing the click en-
sures that the gas cap is completely closed. Be sure
to utilize the proper type and grade of fuel as recom-
mended by the engine manufacturer. See Section I-2
for addi tional infor ma tion.
Fuel Vent
Owner's Manual Page 78
Advertisement
Table of Contents
