Table of Contents
Advertisement
B. SST Arch w/Custom Bimini Top
If you selected an available stainless steel arch (cer-
tain SL models) it comes with a custom bimini top.
The deployment of the bimini top is similar to the bi-
mini top discussed earlier. The forward and aft bimini
bows are attached to the arch. See Figure O3.
To deploy
1. Unboot the bimini from its canvas storage boot
and extend the aft portion of the bimini and attach
the port and starboard straps to their respective
strap eye. Adjust tautness of canvas using straps.
2. Extend the forward portion of the bimini and at-
tach the forward port and starboard straps to their
respective strap eye. Adjust tautness of canvas
using straps.
Strap
Strap Eye
Weather Covers - Section O
Figure O3: Stainless Steel Arch w/Custom Bimini Top
C. Forward Cover
The forward cover is available for the SL models and
must be ordered with the cockpit cover. It is installed
over the bow seating area and is snapped to the deck.
An adjustable pole is provided to adjust the canvas for
taut ness and prevent the build up of water. Refer to
Figure O4.
Figure O4: Forward Cover
Owner's Manual Page 115
Advertisement
Table of Contents
