Installing The Keypad Privacy Shield; Figure 13-1 Keypad Privacy Shield Installation - VeriFone NURIT 8000 Installation Manual

13. Installing the Keypad Privacy Shield

To install the keypad privacy shield:
1. Place the terminal on a flat, stable surface, or hold it
securely in one hand.
2. Position the tabs on the inner front sides of the keypad
privacy shield over the indentations on each side of the
terminal.
3. Press down the keypad privacy shield until it snaps into
place.
1
2

Figure 13-1 Keypad Privacy Shield Installation

Failing to install or removing the keypad privacy shield
may render the terminal non-compliant with ISO 9564
for PIN protection and may violate card association
requirements for PIN Entry Devices.
To remove the keypad privacy shield:
1. Place the terminal on a flat, stable surface, or hold it
securely in one hand.
2. Grasp the keypad privacy shield and pull it away from the
terminal.
30
NURIT 8000
1
Note
Installation Manual