Remove From All Units; Remove On One Of Many Units - Honeywell rapid eye System Administrator Manual

Multi-media
Hide thumbs Also See for rapid eye:
Table of Contents

Advertisement

Security for a Multi-Media System

Remove From All Units

1.
Run Admin to access the System Password window. Either:
Click
Click the System Password command on the File menu.
Press the F8 key.
2.
Remove the password in the System Password box.
3.
Remove the password in the Confirm Password box; the System Password window should look
like fig. 10–4, above.
4.
Click Save and Close.
5.
Using View, click
6.
Click the Security tab in the Maintenance window.
7.
Click Update security on the Security tab. You have the option of
8.
Repeat steps 5 to 7 for each Multi-Media unit in your system.
9.
The Multi SA needs to tell users who use the sites whose System password has been changed, to
refresh their copy of the Multi db, the next time that they use View. See
Database, on p. 250.
If the system password is not removed from a unit, that system password will need to be
remembered when you another site definition is created for that Multi-Media unit. The
system password is also needed if you delete a site definition by mistake. See
Site, p. 23, and

Remove on One of Many Units

You may need to remove a system password from only one unit in your system, when:
Selling the unit to another organization
Sending the unit to Honeywell for repair
This procedure is one of the longest in this
Tip
If there is only one Multi-Media unit used by your organization, do not use the following
procedure. Please use the procedure in section
1.
Check your Multi SA's password records to find out what is the current system password on your
Multi-Media system. If the password is unknown, use procedure
(p. 176), to change the system password on all units first.
2.
Run Admin, to access the System Password window. Either:
Click
Click the System Password command on the File menu.
Press the F8 key.
3.
Remove the asterisks in the System Password box.
176
on the Admin toolbar.
to start a
Maintenance Session
Deleting a
Site, p.26.
System Administrator
on the Admin toolbar.
for a site.
Ending
Maintenance; see p. 60.
Refreshing a Local
Guide. Please proceed with caution.
Removing a System
Password, p. 175.
Remove From All Units
Adding a
first

Advertisement

Table of Contents
loading

Table of Contents