Network Setting - EverFocus EDN Series User Manual

7.1.2.2 Network Setting

You can configure the networking setting on this page. By default, the camera uses DHCP to assign
IP address. Click Apply to apply the changes or Cancel to cancel the changes and return to the
previous settings.
【Network Setting】
Network Type:
DHCP: This setting lets the camera use an automatically assigned (dynamic) IP address. This

address can change under certain circumstances. For instance, when the camera's network
switch/hub has to be rebooted. Do not assign to the DHCP server the same IP addresses used
for the other network cameras and PCs with unique IP addresses.
Static IP: The user can manually set the Static IP address. This type of address is stable and

cannot change, but the user has to make sure there are no address conflicts with other
network-connected devices.
29
EDN2160/2260/2560