EverFocus EDN Series User Manual page 58

Mini dome ip camera h.264, east installation, micro sd card, night vision
Hide thumbs Also See for EDN Series:
Table of Contents

Advertisement

Send an E-mail: Check this box to send the system logs, snapshots or recordings via email.
E-mail security mode: Select an E-mail security mode.
Server address: Input the sender's e-mail address, so that the receiver can recognize the sender
when an event message is received.
Server port: Enter the port number for SMTP. The default is 25.
User account: Input the user's login ID.
User password: Input the user's login password.
Note: If using the SMTP security mode, please don't input the User account and password.
Sender email address: Input the sender's e-mail address, so that the receiver can recognize the
sender when an event message is received.
Recipient email address: Input the e-mail addresses for receiving an e-mail message when
events occur. Please use ";" to separate multiple addresses.
E-mail subject: Input the e-mail subject.
E-mail body: Input the e-mail contents.
Upload to FTP: Check the box if you want the camera to upload the system logs, snapshots or
recordings to the FTP server.
FTP server address: Enter the IP address or the host name of the FTP server.
FTP server port: Enter the port number for the FTP server. Default is 21.
User account: Set FTP User's name.
User password: Set FTP password.
FTP folder name: Assign the recording path.
Store at NAS: Check the box if you want the camera to store the system logs, snapshots or recordings
at the NAS server. For configuring the below settings, Please refer to the 7.3.4 The Recording Type for .
NAS Server Address: Enter the NAS server IP address.
Workgroup: Enter the workgroup name of the NAS server.
NAS Shared Directory: Enter the NAS shared directory path.
User Account: Enter the user name of the NAS account.
User Password: Enter the user password of the NAS account.
Upload to HTTP: Check the box if you want the camera to upload the system logs, snapshots,
recordings or messages to HTTP.
URL: Enter the URL of the HTTP server.
Message: Enter the message contents.
User account: Set HTTP User's name.
User password: Set HTTP password.
52
EDN2160/2260/2560

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents