EverFocus EDN Series User Manual page 12

3. Drill the two marks and insert the supplied two Screw Anchors into the anchor holes. Then, screw
the Mounting Plate to the wall / ceiling.
Mounting Plate
Long Screws
4. Thread the cables from the side cut of the camera or through the wall.
a. To thread the cables through the wall / ceiling:
(1) Drill a hole on the upper-left side of the Mounting Plate.
(2) Run the cables through the hole and then slide the camera into the Mounting Plate.
Mounting Plate
Drill a Hole
Wall /
Ceiling
Cables
Wall / Ceiling
Screw Anchors
6
EDN2160/2260/2560